|本期目录/Table of Contents|

[1]齐庆杰,祁云,张建国,等.综放工作面瓦斯抽采最优钻孔参数研究[J].中国安全生产科学技术,2018,14(6):76-83.[doi:10.11731/j.issn.1673-193x.2018.06.012]
 QI Qingjie,QI Yun,ZHANG Jianguo,et al.Study on optimum drilling parameters for gas extraction in fully mechanized caving face[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2018,14(6):76-83.[doi:10.11731/j.issn.1673-193x.2018.06.012]
点击复制

综放工作面瓦斯抽采最优钻孔参数研究
分享到:

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
14
期数:
2018年6期
页码:
76-83
栏目:
职业安全卫生管理与技术
出版日期:
2018-06-30

文章信息/Info

Title:
Study on optimum drilling parameters for gas extraction in fully mechanized caving face
文章编号:
1673-193X(2018)-06-0076-08
作者:
齐庆杰12祁云12张建国3周新华14
(1.辽宁工程技术大学 安全科学与工程学院,辽宁 阜新 123000;2.矿山热动力灾害与防治教育部重点实验室 辽宁工程技术大学,辽宁 葫芦岛 125000;3. 中国平煤神马能源化工集团有限责任公司,河南 平顶山 467000;4.辽宁工程技术大学 建筑工程学院, 辽宁 阜新 123000)
Author(s):
QI Qingjie12 QI Yun12 ZHANG Jianguo3 ZHOU Xinhua14
(1.College of Safety Science and Engineering, Liaoning Technical University, Fuxin Liaoning 123000, China;2.Key Laboratory of Mine Thermodynamic Disasters and Control of Ministry of Education, Liaoning Technical University, Huludao Liaoning 125000, China;3.China Pingmei Shenma Energy & Chemical Industry Group Co., Ltd., Pingdingshan Henan 467000, China;4.College of Architecture and Engineering, Liaoning Technical University, Fuxin Liaoning 123000, China)
关键词:
综放工作面瓦斯抽采钻孔间距钻孔直径抽采率
Keywords:
fully mechanized caving face gas extraction borehole spacing borehole diameter gas extraction efficiency
分类号:
X936
DOI:
10.11731/j.issn.1673-193x.2018.06.012
文献标志码:
A
摘要:
针对平煤某矿己15-24070(下)综放工作面瓦斯含量高、易超限影响安全生产的难题,采用COMSOL数值模拟软件建立三维抽采模型,结合固体力学、达西定律,研究了钻孔间距、钻孔直径对卸压范围和瓦斯压力衰减规律的影响,确定出合理抽采参数。在此基础上,提出己15-24070(下)综放工作面采用平行钻孔布置方式。现场实践表明:恰当布置钻孔间距、钻孔直径能够显著提高瓦斯抽采率,从卸压瓦斯抽采量角度考虑己15-24070(下)综放工作面钻孔间距3~5 m,直径0.1~0.133 m时,工作面顺层钻孔瓦斯抽采效率达到29%,抽采效果明显。
Abstract:
Aiming at the problem that the gas content in the F15-24070 (below) fully mechanized caving face of a mine in Pingmei was high and easy to exceed the limit, which influenced the work safety, a threedimensional model of gas extraction was established by using the COMSOL numerical simulation software. Combined with the solid mechanics and Darcy’s law, the influence of borehole spacing and borehole diameter on the pressure relief range and the gas pressure attenuation laws was studied, and the reasonable extraction parameters were determined. On this basis, it was proposed that the layout of parallel borehole should be adopted in the F15-24070 (below) fully mechanized caving face. The site application showed that the appropriate setting of borehole spacing and borehole diameter could significantly improve the gas extraction efficiency. Considering the pressure relief gas extraction quantity, the gas extraction efficiency in the bedding drilling of the working face reached 29% when the borehole spacing was 3-5 m and the borehole diameter was 0.1-0.133 m in the F15-24070 (below) fully mechanized caving face, and the gas extraction effect was obvious.

参考文献/References:

[1]袁亮.卸压开采抽采瓦斯理论及煤与瓦斯共采技术体系[J].煤炭学报,2009,34(1):1-8YUAN Liang. Theory of pressure relieved gas extraction and technique system of integrated coal production and gas extraction[J]. Journal of China Coal Society,2009,34(1):1-8.
[2]齐庆杰,祁云.低浓度瓦斯燃料电池发电技术研究[J].洁净煤技术,2017,23(2):114-118.QI Qingjie, QI Yun. Study on the low concentration gas fuel cell power generation technology[J]. Clean Coal Technology,2017,23(2):114-118.
[3]ZHU W C, WEI C H, LIU J, et al. A model of coal-gas interaction under variable temperatures [J]. International Journal of Coal Geology, 2011,86(2/3):213-221.
[4]FAN C J, LI S, LUO M K, et al. Coal and gas outburst dynamic system[J]. International Journal of Coal Geology, 2017,27(1):49-55.
[5]闫磊.腾晖煤矿201工作面钻孔瓦斯抽采参数数值模拟及应用[D].阜新:辽宁工程技术大学,2012.
[6]李波,孙东辉,张路路.煤矿顺层钻孔瓦斯抽采合理布孔间距研究[J].煤炭科学技术,2016,44(8) :121-126.LI Bo, SUN Donhui, ZHAN Lulu.Study on rational space between gas drainage boreholes passing through seam in coal mine[J].Coal Science and Technoloy, 2016, 44 (8):121-126
[7]GERMSNNOVICH.L.N.Deformation of nature coals[J].Soviet Mining Science,1983(5):377-381.
[8]洪林,周西华,周令昌等.采空区气体二维流动的数学模型及其有限容积法[J]. 辽宁工程技术大学学报(自然科学版),2006(S2):4-6.HONG Lin, ZHOU Xihua, ZHOU Lingchang, et al. Mathematic model of air Two-Dimension flowage in the goaf and the finite volume method of this model[J].Journal of Liaoning Technical University (Natural Science Edition),2006(S2):4-6
[9]李宗翔,王继仁,周西华.采空区开区移动瓦斯抽放的数值模似[J].中国矿业大学学报,2004,23(1):77-81.LI Zongxiang, WANG Jiren, ZHOU Xihua. Numerical simulation of gas drainage during open region movement in goaf[J]. Journal of China University of Mining & Technology,2004,23(1):77-81.
[10]郝富昌,刘明举,孙丽娟.基于多物理场耦合的瓦斯抽放半径确定方法[J].煤炭学报,2013,38(1):106-111.HE Fuchang, LIU Mingju, SUN Lijuan. Determination method of gas drainage radius based on multi-physics coupling[J]. Journal of China Coal Society,2013,38(1):106-111.
[11]徐明智,李希建.煤层瓦斯抽放半径及其影响因素的数值模拟[J].工业安全与环保,2012,38(12):28-30.XU Mingzhi, LI Xijian. Numerical simulation of gas drainage radius and its influencing factors in coal seam[J]. Industrial Safety and Environmental Protection,2012,38(12):28-30.
[12]李胜,毕慧杰,范超军等.基于流固祸合模型的穿层钻孔瓦斯抽采模拟研究[J].煤炭科学技术,2017,45(5):121-127.LI Sheng, BI huijie, FAN Chaojun, et al. Simulation study of gas drainage with borehole passed through strata based on fluid-solid coupling[J].Coal Science and Technology, 2017,45(5):121-127.
[13]卢平,李平,周德永等.石门揭煤防突抽放瓦斯钻孔合理布置参数的研究[J].煤炭学报,2002,27(3) :244-248.LU Ping, LI Ping, ZHOU Deyong, et al. Study on proper layout parameters of the gas drainage drills of outburst prevention in rock cross-cut coal uncovering[J],Journal of China,2002,27(3):244-248.
[14]梁冰,袁欣鹏,孙维吉.本煤层顺层瓦斯抽采渗流祸合模型及应用研究[J].中国矿业大学学报,2014,43(2): 208-213.LIANG Bing, YUAN Xinpeng,SUN Weieiji.Seepage coupling model of in-seam gas extraction and its applications[J].,Journal of China University of Mining & Technoloy, 2014,43(2):208-213.
[15]鲁义,申宏敏,秦波涛等.顺层钻孔瓦斯抽采半径及不空间距研究[J].采矿与安全工程学报,2015,32(1):156-162.LU Yi, SHEN Hongyi, QIN Botao,et al. Gas drainage radius and borehole distance along seam[J]. Journal of Mining&Safety Engineering,2015,32(1):156-162.
[16]王继仁,张英,黄戈,等.采空区不同瓦斯抽采方法与自燃合理平衡的数值模拟[J].中国安全生产科学技术,2015,11(8):26-32.WANG Jiren, ZHANG Ying, HUANG Ge,et al. Numerical simulation on reasonable balance between different gas drainage methods and spontaneous combustion in gob area[J]. Journal of Safety Science and Technology,2015,11(8):26-32.
[17]程远平,董骏,李伟,等.负压对瓦斯抽采的作用机制及在瓦斯资源化利用中的应用[J].煤炭学报,2017,42(6):1466-1474.CHENG Yuanping,CAO Jun,LI Wei,et al. Effect of negative pressure on coalbed methane extraction and application in the utilization of methane resource[J].Journal of China coal society,2017,42(6):1466-1474.

相似文献/References:

[1]郭文彬.灵泉煤矿粉尘浓度分布规律的实测研究[J].中国安全生产科学技术,2011,7(3):65.
 GUO Wen-bin.On-site measurement study on distrition pattern of dust concentration in Lingquan mine[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(6):65.
[2]姜二龙,刘健,蔡文鹏,等.深孔预裂爆破技术在低透气性回采工作面中的试验研究[J].中国安全生产科学技术,2013,9(7):20.[doi:10.11731/j.issn.1673-193x.2013.07.003]
 JIANG Er long,LIU Jian,CAI Wen peng,et al.Experiment study on deep hole pre-splitting blasting technology in low permeability outburst working face[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(6):20.[doi:10.11731/j.issn.1673-193x.2013.07.003]
[3]孙东生,刘健,蔡文鹏,等.高瓦斯低透气性煤层水力压裂技术的试验研究[J].中国安全生产科学技术,2013,9(9):49.[doi:10.11731/j.issn.1673-193x.2013.09.009]
 SUN Dong sheng,LIU Jian,CAI Wen peng,et al.Experimental study on hydraulic fracturing technology in high gas and low permeability coal seam[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(6):49.[doi:10.11731/j.issn.1673-193x.2013.09.009]
[4]李英明,杨明东,付永刚.U型工作面上隅角埋管瓦斯抽采数值模拟研究[J].中国安全生产科学技术,2013,9(12):16.[doi:10.11731/j.issn.1673-193x.2013.12.002]
 LI Ying-ming,YANG Ming-dong,FU Yong-gang.Numerical simulation on gas drainage with buried pipe in upper corner of U\|type working face[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(6):16.[doi:10.11731/j.issn.1673-193x.2013.12.002]
[5]蔡文鹏,刘健,孙东生,等.顶板走向高位钻孔瓦斯抽采技术的研究及应用[J].中国安全生产科学技术,2013,9(12):35.[doi:10.11731/j.issn.1673-193x.2013.12.005]
 CAI Wen peng,LIU Jian,SUN Dong sheng,et al.Research and application of gas drainage technique with highlocated drilling method along roof strike[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(6):35.[doi:10.11731/j.issn.1673-193x.2013.12.005]
[6]孙晓梅,吕品,刘琛琛,等.基于CFD及正交试验的工作面流场参数优化[J].中国安全生产科学技术,2014,10(4):54.[doi:10.11731/j.issn.1673-193x.2014.04.009]
 SUN Xiao mei,LV Pin,LIU Chen chen,et al.Optimization of flow field parameters in working face based on orthogonal experiment and CFD[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(6):54.[doi:10.11731/j.issn.1673-193x.2014.04.009]
[7]吴爱军,王巧莉.薛湖矿二2煤顺层钻孔瓦斯抽放的数值模拟与分析[J].中国安全生产科学技术,2014,10(6):90.[doi:10.11731/j.issn.1673-193x.2014.06.014]
 WU Ai jun,WANG Qiao li.Numerical simulation and analysis on gas extraction with bedding drillings in the 22 coal seam of Xuehu Mine[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(6):90.[doi:10.11731/j.issn.1673-193x.2014.06.014]
[8]杨明,闫潮,刘亚军.斜交高位钻孔抽采空区瓦斯设计及优化研究[J].中国安全生产科学技术,2014,10(7):117.[doi:10.11731/j.issn.1673-193x.2014.07.021]
 YANG Ming,YAN Chao,LIU Ya jun.Research and optimization of gas extraction in gob by skew high level boreholes[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(6):117.[doi:10.11731/j.issn.1673-193x.2014.07.021]
[9]戎立帆,柏发松,车志飞.下向穿层瓦斯抽采钻孔新型封孔方法及应用[J].中国安全生产科学技术,2014,10(8):64.[doi:10.11731/j.issn.1673-193x.2014.08.011]
 RONG Li-fan,BAI Fa-song,et al.New hole sealing method and application for gas extraction by downward cross-layer drilling[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(6):64.[doi:10.11731/j.issn.1673-193x.2014.08.011]
[10]徐雪战,孟祥瑞,赵光明,等.基于三维可视化的卸压区瓦斯穿层抽采仿真研究[J].中国安全生产科学技术,2014,10(9):77.[doi:10.11731/j.issn.1673-193x.2014.09.013]
 XU Xue-zhan,MENG Xiang-rui,ZHAO Guang-ming,et al.Virtual simulation of gas drainage drilling through layers in stress-relaxation zone based on three-dimensional visualization[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2014,10(6):77.[doi:10.11731/j.issn.1673-193x.2014.09.013]

备注/Memo

备注/Memo:
国家自然科学基金项目(51274113;51174109);国家“十二五”科技支撑计划项目(2011ZX05041-003);辽宁省教育厅科学研究一般项目 (L2012124)
更新日期/Last Update: 2018-07-05