|本期目录/Table of Contents|

[1]刘杰.工作安全分析(JSA)模式在施工现场实践研究[J].中国安全生产科学技术,2011,7(9):190-194.
 LIU Jie.The Practicable Research on Job Safety Analysis Format in Construction Project Area[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(9):190-194.
点击复制

工作安全分析(JSA)模式在施工现场实践研究()
分享到:

《中国安全生产科学技术》[ISSN:1673-193X/CN:11-5335/TB]

卷:
7
期数:
2011年9期
页码:
190-194
栏目:
职业安全卫生管理与技术
出版日期:
2011-09-30

文章信息/Info

Title:
The Practicable Research on Job Safety Analysis Format in Construction Project Area
文章编号:
1673-193X(2011)-09-0190-05
作者:
刘杰
中交四航工程研究院有限公司,广州? 510230
Author(s):
LIU Jie
CCCC Fourth Harbor Engineering Institute Co., Ltd., Guangzhou? 510230, China
关键词:
工作安全分析(JSA)施工安全
Keywords:
job safety analysis (JSA) construction safety
分类号:
X947
DOI:
-
文献标志码:
A
摘要:
危险源识别和风险评价工作是风险管理的基础环节,常用的危险源识别和风险评价方法有安全检查表、危险可操作性研究、故障模式分析、事故树、事件树、故障树分析等等[1]。危险源识别和评价工作的目的是研究系统的可靠性,包括对系统要素本身可靠性研究和要素间协调性的研究。过去我们通常用安全检查表的方法来分析要素协调性的问题,由于影响要素作用的变量因素多,难以查找并建立统一的安全检查标准,这种方法的适用性并不高。相比而言,工作安全分析方法是一种对系统要素协调性作用变量进行细致深入分析的科学方法。本文通过引入工作分析、评价单元方法,结合职业健康安全管理理论最新成果,对传统的三过程工作安全分析模式进行完善,提出规范的四过程工作安全分析模式。同时,在施工现场领域对工作安全分析进行实践研究。
Abstract:
Hazard identification and risk assessment are the basic elements of risk management. The general techniques include Safety Checklist, Hazard and Operability Analysis, Failure Model and Effects Analysis, Fault Tree Analysis, Event Tree Analysis etc. The aim for hazard identification and risk assessment is to analyze the reliability of work system, includes analyzing the reliability of system elements and the coordination between the system elements. We used to analyze the coordination between system elements by Safety Checklist technology which is considered not applicable, because there are a number of variable factors which infect the coordination. However Job Safety Analysis technology is a scientific technology to analyze the coordination between system elements intensively. This thesis introduces the theory of Job Analysis and Assessment element, together with the latest research results from the occupational health and safety theory, improves the traditional Three Processes theory, puts forward the standard Four Processes theory. In the same time, the practices of JSA Model in construction project area have been studied.

参考文献/References:

[1] 林柏泉.安全系统工程[M].北京:中国劳动社会保障出版社,2007Lin Boquan Safey System Engineering[M]. BeiJing: China Human Resource & Social Insurance Press, 2007[2] 张学森.工作危害分析(JSA)在工程施工过程的应用[J].企业家天地, 2008(9):240~241Zhang Xuesen. JSA application in Construction Process[J]. Word of Entrepreneurs, 2008(9):240~241[3] 赵强,李景群,田建军,龚忠利. 工作安全分析在钻井作业现场的应用[J].安全与环境工程,2010,17(1):99~102,106Zhao Qiang, Li Jingqun, Tian Jianjun, Gong Zhongli JSA Application in oildrilling work site[J]. Safety and Environmental Engineering,2010,17(1):99~102,106[4] 胡蓓.人力资源开发与管理[M].湖北:华中科技大学出版社,2006:58Hu Bei Human Resource Development & Management[M]. Hubei: Huazhong University of Science & Technology Press, 2006:58[5] 李方华,李庆杨,步建东.管理思想史[M].辽宁:东北大学出版社,2003Li Fanghua, Li Qingyang, Bu Jiandong History of Management Ideology[M]. Liaoning: Dongbei University Press,2003[6] 张乃禄,刘灿.安全评价技术[M].陕西:西安电子科技大学出版社,2007:119~121Zhang Nailv, Liu Can Safety Assessment Technology[M]. Shanxi: Xidian University Press, 2007:119~121[7] James E. Roughton, Nathan Crutchfield. Job Hazard Analysis[M].USA:Elsevior,2007:XXX.[8] 赵宏展,徐向东.危险源的概念辨析[J].中国安全生产科学学报, 2006,16(1):65~70Zhao Hongzhan, Xu Xiangdong Discrimination of the Concept of Hazard[J]. China Safety Science Journal, 2006,16(1):65~70[9] 陈国华.风险工程学[M].北京:国防工业出版社,2007Chen Guohua Risk Engineering[M]. Bei Jing: National Defence Industrial Press,2007[10] 孙爱军,刘茂.事故风险控制中的组织管理措施研究[J]. 中国安全生产科学学报,2010,2(3):14~18.Sun Aijun, Liu Mao Study on Organization and Management Measures in Accident Risk Control[J]. China Safety Science Journal, 2010, 2(3):14~18

相似文献/References:

[1]曲晓灵,陈海智.郑州新郑国际机场航站楼钢结构屋盖施工稳定性控制技术研究[J].中国安全生产科学技术,2011,7(6):23.
 Qu Xiao-ling,Chen Hai-zhi.Research on comprehensive construction technology of steel roof in Zhengzhou Xinzheng international airport terminal[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2011,7(9):23.
[2]朱义铁.大跨度预应力混凝土梁高大模架安全设计与施工[J].中国安全生产科学技术,2010,6(2):127.
 ZHU Yi-tie.Safety design and construction of high formwork support for large-span prestressed concrete beam[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2010,6(9):127.
[3]王刚,徐长航,陈国明.基于工作安全分析和风险矩阵法的自升式平台拖航作业风险评估[J].中国安全生产科学技术,2013,9(10):109.[doi:10.11731/j.issn.1673-193x.2013.10.020]
 WANG Gang,XU Chang hang,CHEN Guo ming.Risk assessment on towing operation of jackup platform based on job safety analysis and risk matrix method[J].JOURNAL OF SAFETY SCIENCE AND TECHNOLOGY,2013,9(9):109.[doi:10.11731/j.issn.1673-193x.2013.10.020]

备注/Memo

备注/Memo:
收稿日期:2011-01-02
作者简介:刘杰,工程师。
更新日期/Last Update: